Sounds Heavenly > Products for B&O > Beolit 12 Input Cables

Beolit 12 Aux Input Cables

This product is a range of high quality Pure-Crystal Oxygen-Free Copper, audiophile cables to allow you to connect external audio devices directly to your B&O Beolit 12 portable music player which will even work if you don't have a Bang and Olufsen hifi system or television. Please choose the input device that you want to play through your Beolit 12 speakers from the list on the left side of the page before ordering - if you are in any doubt, please ask!

To play music from an external device via this cable, please disconnect all other devices connected to your Beolit 12 (by switching off the wireless option on the Beolit 12 so that the wireless light on the top panel goes out) then switch the player off and on again. The Beolit 12 will then automatically switch to the Aux socket. If you are connecting an early iPod or iPhone via this cable, please note that the cable will not charge the device. If you are connecting your Beolit 12 to a volume-controlled output socket (ie. a headphone socket or a Powerlink socket), then you will need to set this to approx. 75% of maximum volume, so that the Beolit 12 volume control will operate as intended. Your Beolit 12 can be used as a link speaker in a multi-room Masterlink network by connecting it via the PC port of a Beolink Active link room controller. Please ensure that you specify the correct version of Beolink Active if you require this option.

This cable can be specified to your requirements, allowing you to choose from many popular audio products to connect into your Beolit 12, including:-

* A Powerlink output from a B&O audio or video master

* Aux or Tape output from an older B&O audio system (1960 onwards)

* Stereo RCA plugs to fit the Line Out or Tape Out sockets of most home audio systems

* A non-B&O TV (via the 3.5mm headphone socket)

* An early iPod or iPhone (via the 3.5mm headphone socket-this cable will NOT charge the battery)

* An MP3 player or portable music player (via the 3.5mm headphone socket)

* Beolink Active mk.1 (Type No. 161x) via the PC port

* Beolink Active mk.2 (Type No. 163x) via the PC port

Simply disconnect any other devices connected to your Beolit 12 and it will switch to the Aux Input automatically.

Cable specifications:-

* Double-Screened, Pure-Crystal Oxygen-Free Copper cable with Royal Blue sheath

* Signal conductors (x 2): 7 x 0.2mm PC-OFC copper

* Screening conductors (x2): 16 x 0.12mm PC-OFC copper

* 24 carat Gold-Plated metal-bodied TRS stereo plug to connect to Beolit 12

What's so special about our cables?

Sounds Heavenly use high quality, fully shielded cables with spiral wrapped screening conductors to prevent unwanted electrical noise from interfering with your music. We build our cables with pure-crystal, oxygen-free copper wiring, which provides deep bass notes and clear treble for accurate stereo imaging and a pure, lifelike sound. The strong metal-cased connectors on our cables have gold or silver contacts for optimum signal transfer and a long life. Our cables provide superb sound quality, whilst having a discreet profile to help you hide wiring unobtrusively around your home.