Brush Cable Wall Plate - White
This product is a high quality brush cable entry/exit fitting mounted in a standard white plastic UK electrical wall plate to allow you to connect all of your audio and video cables to your hifi system or television where the cables are fitted into your walls, floor or ceiling. This wall plate can be used with almost all audio and video plugs, including SCART, HDMI, Powerlink, Masterlink, etc - if you are in any doubt, please ask!
The dimensions of the wall plate are approx. 85mm x 85mm x 10mm in total, with a 50mm x 50mm space for fitting cables through the centre. The black brush fitting is large enough for all standard audio and video cables to be passed through with the plugs intact. Depending on the country of use, some mains power plugs may need to be removed to be passed through the brush fitting. This wall plate is suitable for all audio and video cables and prevents cables from needing to be cut and re-joined, whilst giving a neat and tidy finish at the point where they are fed out of the wall.
Please note: This wall socket is mounted on a standard (single-gang) UK electrical face plate. This can either be fitted onto a single-gang UK back plate (not supplied), or screwed directly to your wall, floor or ceiling to tidy up the cable entry points.


